Sling For Automobile Maitenance
Advantage characteristics
This products is made of steel wire rope for important use and low carbon steel production accessories(connecting rod, horn cleat, U type cross)pressed 。Before the production, the steel wire rope should be done self-made equipment pretension processing, applied the maximum load not exceed the 60 % of the minimum breaking force, cleared away the extension and twisting stress of the steel wire rope, so made the steel wire rope center strand and the steel wire stressed uniformly, reducing the intervene times in service, increasing the service life of the steel wire rope, that is the unique compared with the home and abroad peer. The classification of the steel wire rope is usually adopt the point contact or line contact steel wire rope, such as: 6*19，6*37，6*19S，6*25Fi，6*36SW and etc.
Product specification
(1).The connection work environment temperature is in- 40 ~C- 150 ~C.
(2).Guard against small angle bending。
(3).Have wearing away obviously rust-eaten or grave, be declared worthless please.
(4).Think that any twists a spur together with the fingers when the interruption silk number exceeds 10% , should stop being put into use.。
(5).Slippage appear on connection、crack or obvious loss, should stop being put into use.。
(6).Slippage, crack, send out lines and obvious loss appears on connection, should stop being put into use.Connect when being caught in the unexpected or grave deformation or steel wire rope diameter reducing 7%, should stop being put into use.
(7).According to safety, work load is put into use be obliged to.
(8).The slings shall be examined for damage or wearing after being used for a period of time，don't use the slings with defect and the slings should be discarded as useless.
(9).Suppression connects strictly prohibiting from beating, inadmissibility in curved connection place sling.
(2).Guard against small angle bending。
(3).Have wearing away obviously rust-eaten or grave, be declared worthless please.
(4).Think that any twists a spur together with the fingers when the interruption silk number exceeds 10% , should stop being put into use.。
(5).Slippage appear on connection、crack or obvious loss, should stop being put into use.。
(6).Slippage, crack, send out lines and obvious loss appears on connection, should stop being put into use.Connect when being caught in the unexpected or grave deformation or steel wire rope diameter reducing 7%, should stop being put into use.
(7).According to safety, work load is put into use be obliged to.
(8).The slings shall be examined for damage or wearing after being used for a period of time，don't use the slings with defect and the slings should be discarded as useless.
(9).Suppression connects strictly prohibiting from beating, inadmissibility in curved connection place sling.
Product description
This product mainly applies to the vehicle maintenance lifting equipment, and play a role in load bearing and balance in the whole equipment.
This product also widely applies to the mechanical equipment tractive effort.
technical parameter
Sling For Automobile MaitenanceAdvantage characteristics
This products is made of steel wire rope for important use and low carbon steel production accessories(connecting rod, horn cleat, U type cross)pressed 。Before the production, the steel wire rope should be done self-made equipment pretension processing, applied the maximum load not exceed the 60 % of the minimum breaking force, cleared away the extension and twisting stress of the steel wire rope, so made the steel wire rope center strand and the steel wire stressed uniformly, reducing the intervene times in service, increasing the service life of the steel wire rope, that is the unique compared with the home and abroad peer. The classification of the steel wire rope is usually adopt the point contact or line contact steel wire rope, such as: 6*19，6*37，6*19S，6*25Fi，6*36SW and etc.
Precautions
(1).The connection work environment temperature is in- 40 ~C- 150 ~C.
(2).Guard against small angle bending。
(3).Have wearing away obviously rust-eaten or grave, be declared worthless please.
(4).Think that any twists a spur together with the fingers when the interruption silk number exceeds 10% , should stop being put into use.。
(5).Slippage appear on connection、crack or obvious loss, should stop being put into use.。
(6).Slippage, crack, send out lines and obvious loss appears on connection, should stop being put into use.Connect when being caught in the unexpected or grave deformation or steel wire rope diameter reducing 7%, should stop being put into use.
(7).According to safety, work load is put into use be obliged to.
(8).The slings shall be examined for damage or wearing after being used for a period of time，don't use the slings with defect and the slings should be discarded as useless.
(9).Suppression connects strictly prohibiting from beating, inadmissibility in curved connection place sling.
(2).Guard against small angle bending。
(3).Have wearing away obviously rust-eaten or grave, be declared worthless please.
(4).Think that any twists a spur together with the fingers when the interruption silk number exceeds 10% , should stop being put into use.。
(5).Slippage appear on connection、crack or obvious loss, should stop being put into use.。
(6).Slippage, crack, send out lines and obvious loss appears on connection, should stop being put into use.Connect when being caught in the unexpected or grave deformation or steel wire rope diameter reducing 7%, should stop being put into use.
(7).According to safety, work load is put into use be obliged to.
(8).The slings shall be examined for damage or wearing after being used for a period of time，don't use the slings with defect and the slings should be discarded as useless.
(9).Suppression connects strictly prohibiting from beating, inadmissibility in curved connection place sling.